YaleGrip
Pre-order item. Estimated 1 month
Technora® Aramid fiber braid · 4-leg configuration · Abrasion-resistant Maxijacket™ eye
YaleGrips are made from a Technora® Aramid fiber braid and are assembled in a 4-leg configuration extending from a reinforcing, securing eye. The eye is covered entirely with an extra layer of braid, which is saturated with Maxijacket™ urethane, an abrasion-resistant coating for extended life.
Size the grip by anticipated loads, not by the cable size it fits. When the anticipated load needs to be spread over a wider surface area, a six-leg grip is suggested.
⚡ Pulling & Stopping
Electrical-line construction (above & below ground), cable deployment & retrieval.
⚓ Marine & Industrial
Marine stoppers on hawsers, temporary or permanent strain relief.
🧬 No "Fishhooks"
Far stronger than wire mesh grips, with no dangerous sharp wires — safer handling.
🔄 Flexible & Non-damaging
Remains flexible after installation; less damage to mating surfaces than other grips.
- Applied quickly over a wide range of cable diameters without specialized tools
- Noncorrosive · Excellent dielectric properties · Compact & lightweight
- Larger-sized cables accommodated by lengthening tail dimension (“L”)
- May be used for temporary or permanent eyes, both in midspan or on the end
📏 YaleGrip® Sizing & Technical Specifications
| Diameter (Inches) | Working Load (Lbs) | Average Break Strength (Lbs) | Color | Eye Size (Inches) | Tail Length (Feet) | Min. Cable Diameter (Inches) | Max. Cable Diameter (Inches) |
|---|---|---|---|---|---|---|---|
| 7/16 | 1,200 | 6,000 | Red | 6 | 4.5 | 3/16 | 1/2 |
| 9/16 | 2,400 | 12,000 | Blue | 6 | 5.5 | 1/4 | 3/4 |
| 11/16 | 3,600 | 18,000 | Green | 6 | 6.5 | 3/8 | 7/8 |
| 7/8 | 6,000 | 30,000 | Orange | 8 | 8 | 1/2 | 1 |
| 1 | 9,600 | 48,000 | Yellow | 8 | 10 | 5/8 | 1-1/8 |
| 1-1/4 | 14,400 | 72,000 | Black | 12 | 16 | 7/8 | 1-3/4 |
| 1-1/2 | 24,000 | 120,000 | Red | 16 | 22 | 1-1/8 | 3 |
| 1-3/4 | 36,000 | 180,000 | Blue | 18 | 28 | 1-3/8 | 3-1/2 |
| 2 | 58,000 | 290,000 | Green | 18 | 34 | 2 | 4 |
| 2-1/4 | 73,000 | 365,000 | Orange | 20 | 40 | 3-1/4 | 5 |
| 2-1/2 | 90,000 | 450,000 | Yellow | 24 | 52 | 4 | 6 |
Customization & Options
YaleGrip offers multiple upgrades to match demanding environments:
Material: Technora® Aramid fiber · Maxijacket™ urethane coated eye
Configurations: 4-leg (standard), 6-leg (high load distribution)
Tail extension: Custom “L” dimensions for larger cables
Dielectric properties: Yes · Noncorrosive · lightweight
Applications
✔ Why YaleGrip outperforms traditional mesh grips? No fishhook risk, higher strength-to-weight, flexible installation, and less surface abrasion. The reinforced, urethane-saturated eye delivers long-lasting abrasion resistance even in high-cycle pulling.